Home » Cryogenic storage tanks » Measures to avoid static electricity in liquid oxygen storage tanks

https://www.jianshentank.com/storagetank

Measures to avoid static electricity in liquid oxygen storage tanks

Precautions for Industrial Application of Liquid Oxygen Storage Tanks

Content

Personnel entering dangerous places should wear anti-static shoes, anti-static clothing or cotton knitwear. Install static discharge equipment on the body at the escalator of the liquid oxygen tank. Avoid the deposition of static electricity; the grounding system is the foundation and important preventive measure to avoid static electricity. If the center of two adjacent metal composite small objects, flange pieces or tee joints are cushioned with insulators, there should be metal composite jumpers. Maintain the wire joint resistors on time to keep the grounding system in good condition for a long time

Inquiry

More Cryogenic storage tanks

If oxygen encounters an open flame, it has a strong combustion-supporting property. The tank valve and valve mouth are stained with grease, which will cause a fire when it comes in contact with som...

Types of Oxygen Storage Tank Incidents

I am not very familiar with the operation steps of disassembling the pressure gauge or replacing the liquid level meter of the storage tank. The following is a general explanation of the specific d...

Replacing the CO2 Storage Tank Level Gauge

Liquid argon is an industrial gas with many special effects. Argon is 1.4 times heavier than air and can form a stable layer of airflow above the molten pool, which has good protective properties. In addition in the welding process, the smoke generated less, easy to control the welding pool and arc.

Liquid argon storage tanks

The liquid nitrogen storage tank is only used to hold liquid nitrogen, and other liquids are not allowed; check whether the inside of the container is clean and dry before use; pre-cool with a smal...

Cryogenic liquid nitrogen storage tank

Purchasing steel, purchasing heads, purchasing valves, steel plate cutting, rolling, welding, head tank butt jointing, RT weld detection, heat treatment, inner and outer tube = tank pairing, light ...

Cryogenic carbon dioxide tank production process

The inner and outer surfaces of the stainless steel liner are degreased and pickled and passivated. The inner and outer surfaces of the carbon steel shell are sandblasted and rust removed to en...

Vacuum life of cryogenic storage tanks

Specific features are as follows:
(1) The support system of the inner chamber is made of stainless steel, with reasonable and reliable support, which can achieve low heat loss rate and high strength.

Dewar bottle

pitting corrosion, is usually caused by imperfections in the metal surface. The reaction was repeated.

5m3 vertical cryogenic liquid oxygen storage tank

Cryogenic tank also known as liquid nitrogen tank, is a vertical or horizontal double-layer vacuum adiabatic storage tank, the inner liner material selected for austenitic stainless steel,; outer c...

Cryogenic microbulk tank

The liquid argon storage tank is a double-layer fixed vacuum powder adiabatic container (storage tank). The anti-corrosion coating of the surface is done by sandblasting, rust removal, blowing and painting.

Liquid argon cryogenic storage tank

The low-temperature storage tank adopts vacuum insulation, and the general insulation material is pearlescent sand

The main structural features of cryogenic storage tanks

The liquid argon cryogenic storage tank is made of stainless steel for the inner lining and Q235B or Q345R for the outer lining, and the surface anti-corrosion coating is done by sandblasting, rust removal, blowing, spraying and other processes, while a two-component fast-curing liquid coating is used.

Liquid argon cryogenic storage tank