Liquefied gas storage tank

Take the common specification 50m3 liquefied gas storage tank as an example, in order to ensure the design service life of the tank, the nominal thickness of the head is 14mm according to the standard, but the steel plate for the head of our company adopts the customised steel plate with a small thickness of 14.7mm.

The LPG storage tank inspection schedule is as follows. When to inspect LPG storage tanks: at least once a year. The internal and external audit periods are divided as follows: At least every 6 years for security levels 1-3. At least every three years for Security Status Levels 3-

50 cubic meters of liquefied petroleum gas underground storage tanks are mainly used in liquefied petroleum gas station, the production process of the tank has a number of ways.

LPG (Liquefied Petroleum Gas) stations are vital hubs for the storage and distribution of this clean and efficient energy source.

Place the liquefied gas storage tank in a well-ventilated area. and keep at least 1.5 meters away from fire and heat sources After using the liquefied gas storage tank Close the valve completely.

Make sure that the mouth of the discharge pipe of the safety valve of the underground storage tank is 2.5 meters above the ground, and install an elbow or BB at the top of the discharge pipe or mixing discharge pipe so that water does not collect. inside the pipe.

In the LPG tank hydrostatic test before the operation, the operator to ensure that the pump is intact, the pump and the test site connecting pipe is smooth.

Thermometer: When the temperature of the liquefied petroleum gas storage tank increases, the pressure inside the storage tank increases accordingly. To prevent overpressure in the storage tank To achieve the decompression target, the spray equipment must be turned on to cool the storage tank.