LPG tank-Jianshen Tank

Our company has always adhered to the code of conduct of "quality for survival, reputation as guarantee" and the service tenet of "treating people with integrity, flexible management, high quality ...

LPG storage tank quality service

Gas phase port: Ensure the gas phase balance between the medium in the tank and the medium in the vehicle when unloading the truck, and can be used as a backup for the balance port Thermometer: mo...

LPG storage tank accessories function

Safety valve: When the pressure in the tank is abnormal, when the pressure reaches the set pressure of the safety valve, the safety valve automatically opens and begins to discharge pressure. When ...

LPG storage tank accessories function

If material re-inspection is required, the shore will require material re-inspection. In short, materials must be inspected and accepted before they are put into manufacturing pres...

LPG storage tank inspection and acceptance

The quality certificate should be the original or a copy stamped with the official inspection seal of the material supply unit and the seal of the person in charge; Check the phy...

LPG tank material certification

The content of the quality certificate is completely consistent with the actual product; The furnace (can, batch) number on the quality certificate is consistent with the actual ...

LPG storage tank quality certification

External inspection, internal and external inspection, and complete inspection are the three categories of periodic storage tank inspections.

LPG tank inspection cycle

Material inspection requirements for pressure vessels Review the material quality certificate The content of the quality certificate should be complete. Carefully ch...

LPG storage tank quality inspection

Factory inspection process of pressure vessel materials Material purchase→Materials to be inspected→Appearance inspection (quality certificate, material mark, geometric dimensions,...

LPG tank inspection process

Therefore, the materials used in pressure vessels must undergo relevant inspections when entering the factory to ensure the quality of the materials used. Inspections with special requirements for ...

LPG storage tank material requirements inspection

There are many materials for pressure vessels. Different use environments require different materials. The same material undergoes different processing techniques, and the material properties also ...

Material requirements for LPG storage tanks

Application of LPG pump：Model YQB5-5 LPG pump is suitable for 5 cubic meter tank unloading trucks.Model YQB10-5 LPG pump is suitable for 10 cubic meter tank unloading trucks Model YQB35-5 LPG pump...

LPG station accessories-LPG pump applications

The pump is a positive displacement vane pump with an advanced structure. The stator surface is composed of compound curves. Mechanical seals are used at both ends. Each fixed mating end face uses ...

LPG tank station accessories-LPG pump

In a diverse energy landscape, choosing the right energy source is crucial.

LPG vs. Other Energy Sources: A Comparative Analysis

LPG is a go-to energy source for residential applications worldwide.

Ensuring the safe handling and usage of LPG is paramount.

LPG Safety Measures: A Comprehensive Guide

Liquefied Petroleum Gas (LPG) stands out as a versatile and eco-friendly energy source.

Unveiling the Advantages of LPG as a Clean Energy Source

Cut off the power supply related to the storage tank. When entering the tank for inspection, a low-voltage explosion-proof lamp with a voltage not exceeding 12V or 24V should be used, and a ded...

Safe operation of LPG storage tanks

Replace and clean the residual gas in the storage tank, and take samples for analysis to meet safety standards. Open all manholes in the storage tank, remove the inner parts of t...

Safety standards for LPG storage tanks

Check the relevant technical information to understand the defects found in the manufacturing, installation and use of the storage tank. Drain the medium inside the tank, use bli...

LPG storage tank inspection work

Liquefied petroleum gas (LPG) storage tanks are widely used in various scenarios, including but not limited to the following major application areas: Industrial applications: LPG storage tank...

Liquefied petroleum gas (LPG) storage tanks are widely used in various scenarios

The performance parameters of liquefied petroleum gas (LPG) storage tanks vary depending on tank type, design standards and use. The following are some performance parameters commonly associated wi...

The performance parameters of liquefied petroleum gas (LPG) storage tanks

Periodic inspection of storage tanks is divided into external inspection, internal and external inspection and comprehensive inspection. The inspection cycle should be determined as appropriate bas...

Periodic inspection of LPG storage tanks

3) After passing the internal and external inspection, conduct a water pressure test based on 1.25 times the design pressure of the storage tank and an air tightness test based on the design pressu...

Design pressure of LPG storage tank

Main contents of comprehensive inspection 1) All items of internal and external inspection. 2) Conduct non-destructive inspections on the main welds or shells. The len...

Comprehensive inspection of LPG storage tanks

1. Unloading2. Rolling plate3. Welding4. Drill holes5. Mounting flange6. Weld inspection7. Heat treatment (Rolling the steel plate into a cylinder will cause the workpiece to deform. The metal wil...

LPG storage tank Production Process

In case of leakage or fire, drive to a safe place to extinguish or plug the leakage.

Precautions for transporting LPG

4) When there is corrosion on the inner and outer surfaces of the tank, multiple wall thickness measurements should be taken at the suspected parts. If the measured wall thickness is less than the ...

Safe use of 50 cubic LPG storage tanks

1) All items of external inspection. 2) Whether there is medium corrosion or erosion and wear on the inner and outer surfaces of the storage tank and the openings of the pipes. &nbs...

All items of external inspection of 50 cubic LPG storage tank

4) Whether the safety accessories and control devices are complete, sensitive and reliable. 5) Whether the fastening bolts are intact and whether there are any abnormal phenomena such ...

Main contents of inspection of 50 cubic LPG storage tank