YQB5-5 LPG transfer pump

The use and precautions of liquefied gas air pump:
1. Use the inlet of the liquefied gas guide pump to connect the gas cylinder, open the angle valve of the cylinder, and turn the cylinder upside down. If the large steel cylinder has two ports of liquid phase and gas phase, the liquid phase is connected, and the cylinder does not need to be inverted. (It is best if the cylinder outlet is higher than the air guide pump) Check the pressure gauge to see if there is any pressure. Normal pressure is about 2 kg.
2. Turn on the flush switch at the pump outlet. When using it for the first time, it is necessary to discharge the air in the pump, then connect the empty cylinder and turn on all switches.
3. Test the car, turn the wheels by hand, check whether there is any debris in the liquefied gas air guide pump, and start the power switch to test the forward and reverse directions of the pump.
4. Stop when the empty tank is full, cut off the power supply and stop running, and close all valves.