Liquefied gas storage tank operating specifications

As liquid LPG is lighter than water, the water injected into the tank will hold the LPG to the water surface, isolating the LPG from the leak. At this point, the main spray from the leak is water rather than pure LPG, and then other methods are used to plug the leak. In the process of plugging the leak, the release valve at the top of the tank can be opened to release the gaseous LPG, which is less likely to form a hazard and reduces the pressure in the tank.

Safety valve: A safety valve is a safety device that automatically opens and loses pressure when the pressure within a liquefied petroleum gas storage tank becomes too high. Storage of liquefied petroleum gas requires fully open spring-loaded safety valves.

When water overflows from the vent 2. Stop watering and inject nitrogen into the storage tank from the air vent.

LPG pipelines should not be laid close to the heat source.