Need to pay attention to details when installing cryogenic storage tanks

It is recommended to use a protective ring for the foundation of cryogenic storage tanks to help prevent wind and water from eroding around the foundation of the storage tank. Crushed stones, large-diameter gravel or other coarse materials can also be stacked around the foundation of the storage tank after the storage tank is installed. To prevent the erosion of the foundation slope of the storage tank.
 
1. The foundation of the installation of cryogenic storage tanks requires a level and can withstand corresponding pressure. For example, if steel structure is used, the gap should not be too large, and wooden or iron plates should be laid on it;
 
2. When cryogenic tanks store chemicals, there should be good drainage trenches and dilution devices around the site; 3. Since the bottom of the storage tank is inevitably protruding into the tank to form a spherical crown when it is formed, the foundation should be made into a spherical crown similar to the bottom shape, and there is no need to use sand on a horizontal basis to form a ball corresponding to the bottom of the tank. Corona, avoid direct sunlight when used in the open air, and extend the service life;
 
4. Pay attention to safety when installing large-size storage tanks, try to use a crane, if you don't know the method, please contact the tank seller in time.